Daemonic Possession

In a previous post I showed a few units I had put together and planned to base. With a bit of research online I found a method I was happy with, and this method was with the use of cork. The blog this idea came from is The Painting Corps.

Once I'd decided to use cork I needed to find some, this however is easier said than done in the UK it seems. I scoured B&Q, Homebase, Topps Tiles and Wickes but nadda, not even a sniffing of a cork tile, I soon realised the only place I was going to find some was on ebay.

Anyhow, after acquiring the cork tiles I set about breaking one up into rough pieces with a pair of pliers, aiming to make the pieces the same or similar size to the bases. These broken up bits of cork were attached to the round bases with a bit of super glue as I wanted a more stable stick than from what I'd get from PVA. Once dry the bases and cork with brushed with a relatively watered down PVA mix, this was t give the cork a bit more rigidity and a protective layer.



After 24 hours I added 'neat' dabs of PVA glue to the areas of the bases not covered by the irregular contours of the cork tiles. I then sprinkled over citadel grit/sand, I'm sure anything could be used, I'd have preferred ballast, but I didn't have any.



The bases were once again left for 24 hours, which was yesterday, so they'd dried by the time I got home this afternoon. With a dab of super glue on the models feet, they were attached to the cork tile bases.


-

-


Personally I don't think they look too bad for a first attempt. What do you guys think?

-Draz.

I've had a day off work (Woot!) and decided instead of doing the normal clean and sort stuff out I'd get some needed hobby time in. The last two weeks have been extremely hectic at work and thus not a lot has really been done as the energy hasn't been there.

So I got to work on my CSM: Battleforce and the first to be assembled was the Khorne Berzerkers. I haven't done anything to them apart from give the champion a Power Fist, he'll also have a trophy rack, but that hasn't been started as yet.



The scheme will be as it is in the Codex for Black legion with the helms and shoulder pads red, whilst the rest remains Black Legion, I'll more than likely do the Power Fist red also to break the body up a wee bit. As you can see I started basing, and then realised I've ordered some Cork tiles from ebay to use for basing, so they'll have to be removed. I got over excited and too eager, oh well.

Next on the assembly line was the two, 7 man Plague Marine Squads with 2x Meltaguns and Power Fist. The meltas are from a blister pack I purchased from GW as I wasn't sure I'd have enough in spares, as I planned originally to have a 5 man chosen squad with 5 meltas. With these guys I'll be doing the same type of scheme as the Khornes as I want to keep the same design going through the army, rather than having every unit look different with the exception of colour.



-------



It took all day, but that's what I have. In previous assembling I've taken care to get rid of flashing/mould lines to a degree, but not overly been worried about it. However, with these I've taken my time and really tried to get all excess off of the models, I'm sure there will be some still on them, but at least I tried.



That's it for today, hopefully the cork tiles will arrive tomorrow, if not I'll just assemble something else.

-Draz.

The grips of Chaos have taken me from at last. For many months I have managed to stem their hunger and reaping claws of dread, but no longer can this mortal body and soul bat down the darker force.. and you know what, I embrace it. Muwahaha.

Anyway, I've decided to venture into the Chaos realm with a Legion that won't be unknown to you all, and some may even say it's a little bland - Chaos Undivided. My main reasons for going this route was firstly ease, I'm new to the hobby and didn't want to be bogged down with trying to paint colours that were out of my depth. It also allows to a bit more create license in the units I use and the colour scheme I can employ.

I want to paint for the enjoyment and I realise from trying to paint initially Imperial Fist and then Flesh Tearers that there is no way I can enjoy it, especially as a new comer if I dread sitting down and painting a sea of one colour. So I'm not going to.

Now, onto where I've started, the tanks; these are my first port of call because I know within me it's probably the least favourite part for me. Painting a plain of flat surfaces and trying to get the paint thin enough to not get too many brush strokes, this leads to many layers and then leads to ARGH! So I thought I'd get it out the way first, however to my surprise I've enjoyed painting them a lot more than I initially thought, taking away the black areas and focusing on the coloured I'm quite please, there are overly too many brush strokes visible, and those that are I'd put down to my haste of wash appliance.

Here they are so far.

Chaos Undivided generic Rhino


-



Undivided Khorne Rhino


-



Undivided Nurgle Rhino


As you can see from the pictures there are no spikes! WooT! I'm at a stage where I'm thinking that people are going too overboard on spikes, slim, nurglish stuff and a mass of skulls. I know this is what Chaos ultimately is, but I thought I'd go for a more renegade stylish force first and then at a later date for some more spikey, black, pustule contaminated milarky.

Anyway, this is what I have so far, as you can probably tell they aren't totally finished, and I'm debating doing to the Generic Rhino as I have to the others, but with a yellow to make it stand out more, but then am I making it too uniform? who knows, we'll see.

-Draz.